The ghost will prevent the starting of the engine unless the unique, user defined pin code has been entered first.

A modern thief can use diagnostics to detect circuit cuts on modern vehicles. The ghost has no circuit cuts so it cannot be found using these methods.

Thieves cannot use sophisticated rf scanning, code grabbing technology to detect what security device your vehicle has when it does not transmit any signals like conventional security systems.

Low probability of detection, and allows for placement almost anywhere in the vehicle.

The unit communicates with the ecu on the databus to immobilise the vehicle there is no way a thief could listen for the tell-tale clicking of the traditional immobiliser relay.

A thief cannot simply add a new key or replace an ecu to bypass the ghost and start the vehicle. Only a correct pin code will allow the engine to start.

Due to the nature of the data bus communication the ghost has been adapted and tested for every vehicle we list as compatible. If we list your vehicle you can be sure we have thoroughly tested its operation with the ghost.

If the pin code is forgotten, the car is sold or a button is broken there is a secure, unique reset code for each device.

Service mode allows your vehicle to temporarily start and drive without requiring the pin code. The ghost will exit service mode based on speed and time or by simply entering the pin code.

At any time you can easily change the pin code. Only you will know the unique pin code for your vehicle.

The buttons in modern vehicles send data all around the vehicle which allows us to detect many different keys being passed without extra wiring.